Description
Technical information
Round Balers RB 455/465 Series Variable Chamber
6 MODELS - BALE DIMENSIONS FROM 90-150 OR 90-180 CM
Customers have helped design the new range of balers. Quick baling at high and consistent density is an important requirement in order to collect valuable crop during the narrow window of opportunity and preserve its quality. This is what Case IH variable balers are all about!
CAPACITY AND DENSITY GO TOGETHER
We integrated a multitude of features into the new RB design so that every model is capable of following the largest combine or baling the heaviest crop with remarkable speed and efficiency. The bale size can be altered and monitored from the comfort of the tractor seat and the wrapping system is ultra-reliable – so there’s no need to worry about the crop type or conditions – simply follow the swath.
MONITOR
Performance at your fingertips: intuitive control of the baler with a black/white control terminal or with advanced ISOBUS III compatible colour monitors suited to all types of tractors and customer requirements.
HIGH SPEED PICKUP
Clean pick up of all crop types: choose from the standard 4-bar or heavy duty 5-bar pickup with heavy duty tines. The new double auger option with integrated feeding roll allows high capacity baling in large windrows.
ROTOR CUTTER & DROP FLOOR OPTION
Work in comfort: choose from rotor feeder and rotor cutter versions. In the latter the 15 knives, protected from stones, can easily be replaced without using tools. The drop floor allows quick clearing of any blockage without leaving the tractor seat.
EXCELLENT BALE ROTATION
Four individual rollers form part of the bale chamber design, creating a small chamber to start early rotation. Four high strength laced or endless belts produce wellformed high density bales, with superb weathering characteristics. Excellent belt surface grip rotates the bale as it forms, without slipping, to produce a tightly-packed bale with a moisture-resistant surface.
DUAL DENSITY OPTION
High efficiency, high quality: the dual density option enables you to add extra weight to the bale, making this an industry-leading high density baler. Fewer, heavier bales require less transport and storage, and promise higher silage quality.
Characteristics
| Model | RB 344 Rotor Feeder | RB 344 Rotor Cutter / Silage Pack |
| Bale Size | ||
| Bale diameter, (mm) | 120 | 120 |
| Bale width, (mm) | 125 | 125 |
| Tractor Requirements | ||
| Minimum PTO power (hp) | 55 | 70 |
| Hidraulic distributors | 1 | 1 |
| Pick-up | ||
| Width, effective (m) | 2.0 | 2.0 |
| Flotation | Adjustable spring | Adjustable spring |
| Gauge wheels, 15 x 6.00-6 | 2 | 2 |
| Rotor / Cutter | ||
| Maximum number of knives | - | 15 |
| Knife dstance (mm) | - | 87.5 |
| Knife activation | - | Electric, manual |
| Knife protection | - | Spring |
| Feeder System | ||
| Feeder | Rotor with single tines - rotor width 1.4m | |
| Wrapping System | ||
| Type | Performance monitor-controlled net-standard | |
| Wrap type | Net or plastic std.-twine option | |
| Film application | - | Twin sattelites 750mm. |
| Bale density control | ||
| Type | Tension spring controlled | |
| Tyres | ||
| Standard Tire size | 15.0/55x17-10ply | 15.0/55x17-10ply |
| Optional Tire size | 19.0/45x17-10ply | 19.0/45x17-10ply |
| Baler dimensions | ||
| Total length (mm) | 4050 | 6200 |
| total height (mm) | 2350 | 2800 |
| Width, less pick-up wheel (mm) | 2450 (with 15.0/55x17) | 2850 |
| Width, with pick-up wheel (mm) | 2690 (with 15.0/55x17) | 2850 |
| Weight (kg) | 2775 | 4810 |
| Other equipment | ||
| Twine tie | - | |
| Performance monitor | ||
| Hydraulic rotor reverser kit | ||
| Quarter turn bale chute | - | |
| Standard | ||
| Optional at extra cоst | ||
| Not avalable | ||
Table 2
| Model | RB 455 | RB 465 |
| Bale Size | ||
| Bale diameter, (mm) | 914 to 1524 | 914 to 1829 |
| Bale width, (mm) | 1181 | 118 |
| Bale weight, (kg) | 181 to 816 | 181 to 998 |
| Bale Forming | ||
| Bale chamber, Fixed or Variable | Variable chamber | |
| Forming mechanism, Belts, Rolls, Chain & slats | 6 rolls and 6 belts | 6 rolls and 6 belts |
| Belt width, (mm) | 178 | 178 |
| Belt description | Premium Laced std; Endless opt. | Premium Laced std; Endless opt. |
| Tensioning method | Single hyd. Cylinder; In-Cab control opt. | Springs & hydraulic cylinders |
| Cutter, Chopper, Slicer | ||
| Cutter-chopper available | Rotor Cutter, Rotor Feeder or Silage Special optional | Rotor Cutter, Rotor Feeder or Silage Special optional |
| Bale ejector | ||
| Bale ejector description | Bale ramp spring-loaded; hydraulic opt. | Bale ramp spring-loaded; hydraulic opt. |
| Twine and Wrap Systems | ||
| Twine ball storage, quantity | 6 active in front; plus 2 each side opt. | 6 active in front; plus 2 each side opt. |
| Twine system control | Automatic, electric | |
| Netwrap, meshwrap feature | Netwrap optional | |
| Standard Pickup | ||
| Pickup working width, (mm) | 2020 | 2020 |
| Outer tine-to-tine width, standard, (mm) | 1800 | 1800 |
| Tine spacing, (mm) | 67 | 67 |
| Number of tine bars or tine rows | 4-bar or 5-bar | 4-bar or 5-bar |
| Number of tines | 112 on 4-bar; 140 on 5-bar | 112 on 4-bar; 140 on 5-bar |
| Windguard description | Tine style std; Roller style opt. | Tine style std; Roller style opt. |
| Pickup gauge wheel | 1 standard; 2nd optional | |
| Pickup lift, manual or hydraulic | Manual or hydraulic | Manual or hydraulic |
| Optional Pickup | ||
| Optional pickup working width, (mm) | 2286 | 2286 |
| Outer tine-to-tine width, optional, (mm) | 2070 | 2070 |
| Tires | ||
| Standard Tire size | 18L-16.1SL 10PR | 18L-16.1 SL 10 ply |
| Optional Tire size | 31x13.5-15, 8 ply | 21.5Lx16.1, 10PR or 31x13.5-15, 8PR |
| Baler Dimensions and Weight | ||
| Overall length, gate closed, (mm) | 4445 | 4801 |
| Overall baler width, (mm) | 2515 to 3048 | 2515 to 3048 |
| Overall height, gate closed, (mm) | 2667 to 2845 | 2896 to 3048 |
| Weight, (kg) | 3080 to 3561 | 3300 to 3775 |
| PTO Drive | ||
| PTO speed, rpm | 540 std.; 1000 opt. | 540 std.; 1000 opt. |
| Drive protection | Multiplate ship clutch | Multiplate ship clutch |
| Tractor Requirements | ||
| Tractor power, hp | 60 to 105 | 70 to 105 |
| Number of hydraulic remote circuits | 1 to 4 | 1 to 4 |
Last seen products
